Edger guide Use only the 40V line. Do not at any time let brake fluids, gasoline, petroleumbased products, Before using the trimmer for to read all safety precautions, and follow the inst ructions in the Battery Charger section. Scrupulously comply with local regulations for the disposal of waste materials Always wear eye protection. Battery Greenworks 40V 4 ; Bumping the head Insert one line into the anchor hole in the upper part of the spool while follow unplugging it. SYMBOL SIGNAL MEANING DANGER Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. machine, but hand it over to a disposal centre, in accordance with the local 40V LITHIUM-ION CORDLESS STRING TRIMMER 21242 Owners Manual TOLL-FREE HELPLINE: 1-888-90WORKS (888.909.6757) www.greenworkstools.com Read all safety rules and instructions carefully before operating this tool. For Trimmer damaged. sure that all items listed in the packing list are included. Avoid unintentional starting. 1. the other line into the anchor hole in the bottom part of the spool. approximately 15cm beyond the slot. 
button; their use. Cut tall grass from the top down to prevent wrapping. This trimmer is equipped with a line cut-off blade on the grass deflector. Voltage: 40 volts WARNING Remove the battery pack. Do not discard the packing material until you have carefully inspected RLdgF1hN'@~E'h@_Zj+4$oB{V^+h%c!LVIX. Reinstall the spool cover by depressing tabs into slots and pushing down this product. Press the safety lock out button (2) and squeeze the trigger switch (1) to start. Keep a firm grip with both hands while in operation. 3. 1 5 31105710 0.065 spool assy. grip design with a forearm support. damage, weaken or destroy plastic which may result in serious personal injury. 6. This
WARNING
Do not attempt to modify this product or create accessories not recommended This will maintain WARNING Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury. While holding the battery latch place one hand the the trimmer handle Always make sure the string trimmer switch is OFF before inserting or removing the battery pack. If you store your unit for long periods Use only identical manufacturers replacement parts and accessories. of the switch trigger until the line reaches the length of the grass deflector Cutting Path Diameter: 254/305 mm Refer to string replacement earlier LIMITED FOUR-YEAR WARRANTY GREENWORKS hereby warranties this product, to the original purchaser with proof of purchase, for a period of four (4) years against defects in materials, parts or workmanship. button with the positioning hole and slide the two shafts together. SOLUTION To secure the battery pack, make sure the latches on the top of the battery pack snap into place. pack snaps into place. Cutting diameter slide The trimmer is powered by a G-MAX 40V Do not point the string trimmer in the direction of people or pets. (1.65 mm) diameter line. 10. Trimmer smokes during operation. practice will prolong battery pack life. Read, understand, and follow the Battery Charger instructions. operating position before switching on. and a protective guard for the cutting head. The trimmer will cut better when moved from left to right across the area OPERATION CHARGING PROCEDURE (See Figure 10) that maximum run time can be achieved. to the product by the manufacturer and require customer installation. x-mS4MrH{ )dd/D_8&$)fU=B"H$D~w/{pxO/??/xA/?;l\Noy79^~/_|w~~zw/7~Lx]N^>lu~l[{?m[p{9 ry9o\}99Eb/CNt~._/8Lv8cFq:`t^=k`x#t{]M~?n _WrNxqX/pt]n;N _o&@o+#\G'X1x $#OtU^+\q93*saX0@vv F&%;\"Qwf'rXp~?f#~go?#m:!KgCow !|G@noG ?h!:.n@_Uw;Eex0G#xhK4y9?h=>\ AOG})C67dlTZ#$|)SECk=oz9:^382Cdl:"*kex@.gg2|s"U-o\`:jX7'q2a'vE2@EsF/xLBVq^2[N AEz=/5`LlipglXdI+: # $t\\,l-w-lB?h7i`n>+ WARNING Measuered sound power level: LWA.d=96 dB(A) Do not use solvents, water, or place in wet conditions. Failure to avoid contact can result in serious personal injury. With the trimmer running, release the switch trigger. Do not overreach when operating grass trimmer/edger. 1 4 31103723 Lower shaft / motor assy. Try not to cause any disturbance to the surrounding Clean all foreign material from the trimmer. Push down on the spool cover locking it to the spool housing. Loosen the knob on the coupler. KNOW YOUR STRING TRIMMER KNOW YOUR STRING TRIMMER (See Figure 1.) Invert the string trimmer to access the trimmer head. Use original manufacturers replacement cutting line for best performance.
Charge the battery pack according to the instructions included with your model. Any such alteration or modification is misuse Most plastics are susceptible 1. the tool. with each stop and start Replace the spool, and the spool cover. Remove the battery pack. Use For best cutting, advance line until it is trimmed to length by the line Avoid using solvents when cleaning plastic parts. Place the battery pack in the trimmer. 2. 1. Store and charge your batteries in a cool area. Trimmer should be held at a comfortable position with the rear handle parts are replaced. Proper interpretation of these symbols will allow you to operate the product better and safer. Lock-out trigger is angled toward the rear handle that allows for comfortable operation. replaced by the customer. Wind (adsbygoogle = window.adsbygoogle || []).push({}); The battery trimmer Greenworks 40 volt (model G40LT) is an excellent Read all safety rules and instructions carefully before operating this tool. To Turn On/Off: (See Figure 7.) Do not allow foreign material into the recessed cavity or on the contacts. Always make sure the battery pack is removed and the switch turned OFF, before inspecting, adjusting, or maintaining any other part of the hedge trimmer. releases from the slot in the spool. Charger: 29417 / 29447 is lightweight (only 4.2 kg), low noise and vibration levels, and an ergonomic when using the machine, for the benefit of both social coexistence and the
9 Trimmer Tips Before each use Make sure the protective guard is tightly installed. Push in the release button located on the lower shaft. cut-off blade.
WARNING 1 6 3411546A-6 Single line spool cover 1 7 31102723 40V 12 guard assy. head. Weight with battery pack: 4.2 kg 6 0 obj 1. and secure shaft coupler. The battery life will be shortened. use any attachments or accessories not recommended by the manufacturer of Please study them and learn their meaning. TROUBLESHOOTING PROBLEM Motor fails to start when switch trigger is depressed. for use with this product. This lithium-ion battery will not develop a memory and may be charged at any time. penetrating oils, etc., come in contact with plastic parts. to cool and fully charge immediately. << /Length 7 0 R /Filter /FlateDecode >> personal injury. SYMBOLS Some of the following symbols may be used on this product. taken to specified waste disposal centres where the material will be recycled. Its main use is to trim grass in hard-to-reach
The attachment connects to the power head by means of a coupler device. Do not put any object into openings. 
Use the tip of the cutting line to do the cutting; do not force cutting All batteries gradually lose their charge. the lower shaft until the button locks into the positioning hole. Keep away from corrosive agents such as garden chemicals and de-icing Do not Remove the grass. Battery warranty - 2 years. To stop the string trimmer, release switch trigger to stop. Align the tabs on the spool cover with the slots in the spool housing on the trimmer head. moisture.
fits between the slot on the auxiliary handle. Insert the end of line through the opening (4) in the spool housing (3). line to manually advance the cutting line. Align the tongue (3) of the battery pack with the cavity in the blower housing. Comfortable grip with support in the forearm; 4. pack with grooves in the trimmers battery port. Keep the trimmer tilted toward the area being cut; this is the best Avoid contact with
To prevent accidental starting that could cause serious personal injury, 13-Inch 40V Cordless String trimmer, Battery Not Included 21332. The use of attachments or accessories not recommended can Do not use string trimmer. This model is equipped with a fuse against accidental start-up
Description Greenworks 40V Li-Ion charger Q'ty 1 31102998 1 2 31104975 Greenworks 40V 4Ah Li-Ion battery 1 3 31104723 upper shaft / handle assy. Service Centre. Dont expose power tools to rain or wet conditions. Set the unit on a flat, level surface. Make sure the end of the cutting line is extended below normal room temperature will shorten battery pack life. Press and hold the battery latch button on the back of the battery pack. Slide the auxiliary handle over the metal ring and ensure the metal ring Install more string. than normal, or when trimming efficiency diminishes. To avoid serious personal injury, always remove the battery pack from the Fuse and protective cover of the cutting part; Light weight - 4.1 kg; WARNING can easily be damaged by the cutting line. The battery pack may be stored in the charger, however, it is recommended to disconnect the charger from the power source. 3. 1 8 3220905 Guard screws 2 9 1210000101 Guide 1 10 31101723 Auxiliary handle assy. Remove all objects such as rocks, broken glass, nails, wire, or string which can be thrown or become entangled in the machine. Make sure the battery is fully charged and that the charger is disconnected before using or storing the trimmer. result in serious personal injury.
personal injury. Carefully remove the product and any accessories from the box. loose parts such as screws, nuts, bolts, caps, etc. of this trimmer. Always unplug the charger when there is no battery pack in it. Cutting line. Use of any other parts may create a hazard or cause product damage. When servicing, use only identical replacement parts. Manual; C A U T I O N Always allow 5 seconds or more for the cutting line spool to stop rotating after releasing the trigger switch. Use clean cloths to remove dirt, dust, oil, grease, etc. 2. and that battery pack is fully seated and secure in the trimmer before beginning Remove the spool from the cutting head. Inspect the product carefully to make sure no breakage or damage occurred and remove battery pack. and keep hands clear of the lock-out button when carrying or transporting 48 minutes from a 4 A / hour battery) and no need to use gasoline and oil, Once auxiliary handle is in the desired in use position tighten the knob until locked into position. PARTS LIST Parts Num. Stone
ASSEMBLY INSTRUCTION AUXILIARY HANDLE (See Figure 3.) until the button is locked into place. using a philips head screwdriver (not included). Temperatures above or Power tools create sparks which may ignite the dust or fumes. Insert the handle knob through the auxiliary handle. to try to advance the line will damage the trimmer and void the warranty. Minimum time for preparation for work, switching on - by pressing one Do not use this product if any parts on the Packing List are already assembled best performance and keep line long enough to advance properly. Never allow children to operate the equipment. stream Replace the spool (1) with a new pre-wound spool.
Position auxiliary handle onto the upper porti on of the trimmer shaft by sliding over shaft. The battery pack is not charged when it is purchased. 
motor is protected against overload. the blade. After extending new cutter line, always return the machine to its normal Only the parts shown on the parts list are intended to be repaired or 11. % NOTE: The trimmer is equipped with an auto-feed head. Motor overload protection; example, these are narrow and uneven places, large slopes, etc. GUARD (See Figure 2. MAINTENANCE WA R N I N G before adjusting, inspecting, or cleaning the blower. WARNING .065 in. Keep proper balance at all times for better control of the tool in unexpected situations. Upper shaft Cleaning Remove the battery pack. Advance line whenever you hear the engine running faster Do not use strong solvents or detergents on the plastic housing or plastic components. CAUTION Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury. Store the battery pack where the temperature is below 27C and away from Battery pack: 29717 / 29727 Use of any other parts Use of this product with damaged or missing parts could If grass becomes wrapped around the string head: Remove the battery pack from the trimmer. 2. the shafts are not locked into place. To remove (See Figure 6.) 2. The vibration emission during actual use of the power tool can differ from ENVIRONMENTALLY SAFE BATTERY DISPOSAL The following toxic and corrosive materials are in the batteries used in this hedge trimmer battery pack: Lithium, a toxic material. 5. Switch trigger
For complete charging instructions, refer to the Operators Manuals for To install (See Figure 6.) Front handle time and shorten trigger time.
Li-Ion battery (2Ah or 4Ah), which can be used with all other devices in the lines clockwise around the spool simultaneously, as shown by the arrows operation. avoid vibration risk suggestion: Wear glove during operation limit operating String will not advance when using the bump-feed head. ASSEMBLY INSTRUCTION To replace the spool: 1. WARNING 13" 4a electric string trimmer (24 pages), 15" 5.5a electric string trimmer (24 pages), 40v brushless cutter/string trimmer (25 pages), 20v lithium-ion cordless string trimmer (22 pages), 24v lithium-ion cordless string trimmer (23 pages), Top mount curved shaft trimmer (29 pages), 80v battery lawn trimmer and brush cutter 2 in (280 pages), 40v battery lawn trimmer and brush cutter 2 in 1 (179 pages), Manual will be automatically added to "My Manuals", Trimmer GreenWorks 2100000 Owner's Manual, Trimmer GreenWorks 2101000 Owner's Manual, Trimmer GreenWorks 2101202 Owner's Manual, Trimmer GreenWorks 2101602CT Owner's Manual, Page 18: Environmentally Safe Battery Disposal.
Pull the cutting line extending from the cutting head so the cutting line OPERATION CHARGER MAINTENANCE Keep the charger clean and clear of debris. Remove the old spool.
the declared total value depending on the ways in which the tool is used; Do not carry the grass trimmer/edger with your finger on the switch. Wait for battery pack 9. Align raised ribs on battery 3 year warranty. Keep the air vents free of obstructions, sawdust, and wood chips. NOTE: If the button does not release completely in the positioning hole, a careless fraction of a second is sufficient to inflict serious injury. G-MAX 40V G40LT cordless trimmer 30 cm, art. 7. of a product that may have been improperly assembled could result in serious Align the release during shipping.
Tighten until there is no movement in the handle. Brush or blow dust and debris out of the air vents using compressed air or a vacuum. GREENWORKS, at its own discretion will repair or replace any and all parts found to be defective, through normal use, free of charge to the customer. CONTENTS Contents 2 . 2 General safety rules 3-5 Symbols . GENERAL SAFETY RULES WA R N I N G Read and understand all instructions before using this product. NOTE: Remove any old cutting line remaining on the spool. Work from a 40V battery compatible with other devices from the 40V line; NOTE: The line will extend approximately 1/4 in. Parts on this list are not assembled and satisfactorily operated the product. For long-term operation, the GENERAL SAFETY RULES Keep all parts of your body away from any moving parts and all hot surfaces of the unit. Wipe off the housing and the plastic components using a moist, soft cloth. waste must not be disposed of as normal waste, it must be separated and Model Num. WARNING Release the switch trigger and lock-out trigger to stop the trimmer. Failure to do so could result in objects being Shaft coupler Make Store it in a place that is inaccessible to children. Cut tall grass from the top down. after mowing. Align the holes on the auxiliary handle with the holes on metal ring. Contact with the trimmer cutting head while operating can result in serious Grass wraps around shaft housing and string head. Grass deflector Read all safety rules and instructions carefully before operating this tool. salts. replacement for an electric or gasoline trimmer, it is easy to cope with Long autonomous operating time (up to GENERAL SAFETY RULES If the power supply cord is damaged, it must be replaced only by the manufacturer or by an authorized service center to avoid risk. Maintain tool with care. Insert the screws into the trimmer head, fastening the guard in place Align the screw holes on the guard with the screw holes on the trimmer The higher the temperature, Release the trigger switch (1) to stop. to damage from various types of commercial solvents and may be damaged by Pull spool cover up to remove. Avoid trees and shrubs. Do not use with any opening blocked; keep openings free Check the work area before each use. Install the new spool so that the cutting line and slot align with the Refer to string replacement earlier in this manual. the quicker they lose their charge. slot on the new spool. 2 1 3 4 Fig. fasteners and caps and do not operate this product until all missing or Lower shaft To secure the battery pack, make sure the latch on bottom of the battery
Size of the cutting blade 30cm around the shaft housing and string head which may cause damage from overheating. The model about hip height. of time without using it, recharge the batteries every month or two. 5.
WARNING laws in force. 3. Refer to spool replacement earlier Do not allow children or untrained individuals to use this unit. Motor fails to start when switch trigger is depressed. 1. 8. Place the guard on to the trimmer head. Wait two seconds, and press the switch trigger. SYMBOLS The following signal words and meanings are intended to explain the levels of risk associated with this product. Tighten securely all The safe use of this product requires an understanding of the information on the product and in this operators manual as well as a knowledge of the project you are attempting.
on the spool. %PDF-1.3 Wire and picket fences cause extra cutting line wear, even breakage. OPERATION WA R N I N G To avoid injury: Do not squeeze the trigger while the grass trimmer/edger is inverted. 2101507, model G40LT; Battery life up to 48 minutes from 4 A / hour battery; your battery pack and charger models. places where a conventional 4-wheel mower simply won't cut the grass. ASSEMBLY INSTRUCTION WA R N I N G Replace the battery pack or charger immediately if the battery case or charger cord is damaged. Thread the cutting line into the eyelet. Never store batteries in a discharged condition. Push in tabs on sides of spool cover. Vibration: 3,5m/s2, K=1,5m/s2. Make sure the latch on the back of the battery pack clicks into place WARNING Environmental protection should be a priority of considerable importance Cut two lines, each being approximately 10 ft. (3 m) long. Charge the battery pack according to the instructions included with
WA R N I N G All toxic materials must be disposed of in a specified manner to prevent contamination of the environment. hand on the front handle. Pull string while pressing line release button. WARNING When not in use, string trimmer should be stored indoors in a dry, locked up placeout of the reach of children. Insert the battery pack (1) into the charger (2). Do not allow familiarity with products to make you careless. Cutting Line Diameter: 1.60 mm ASSEMBLY INSTRUCTION BATTERY IMPORTANT! No load speed: 7,500 (10%) /min 2. area. damaged parts are replaced. 3 1 2 Fig.3 1. If the battery must be stored in a warm place, charge it frequently. Wipe with a dry cloth. This will prevent grass from wrapping Keep fan area clean for best and safest performance. Rear handle TOLL-FREE HELPLINE: 1-888-90WORKS (888.909. A fully discharged battery pack will require approximately 60 minutes (73Wh) / 120 minutes (146Wh) to fully charge from a discharged state. OPERATION Fig. Push the black button located on the cutting head while pulling on cutting WARNING To start the string trimmer, press and hold the lock-out button (1) and to your product when you unpack it. Never use blades, flailing devices, wire, or rope on this product. To install the new spool, make sure the cutting line is captured in the your model. Rotate deteriorated parts or any elements with a strong environmental impact; this cutting area. The advantages of the model: The line cut-off blade on the grass deflector is sharp. in this manual. At the time of decommissioning, do not pollute the environment with the This is a diagnostic charger. in this manual. Ensure a fully charged battery is installed into the string trimmer. 2. trimmer 3. POSSIBLE CAUSE Battery is not secure. WARNING Press the latch button (1) on the battery pack down and hold. Do not store the grass trimmer/edger in sunlight, in an excessively warm place, or near a furnace. tall grass and even small shrubs. Call for technical service. Tree bark, wood moldings, siding, and fence posts Failure to follow all liquids, gases, or dust. 2. trimmer NOTE: may require a strong pull to remove it. NOTE: To avoid serious personal injury, always remove the battery pack Do not spray, wash, or immerse the air vents in water. and could result in a hazardous condition leading to possible serious personal Follow these tips when using the trimmer: Hold the trimmer with your right hand on the rear handle and your left Warranty card. Remember that tool when cleaning or performing any maintenance. Charger Greenworks 40V; thrown into your eyes resulting in possible serious injury. may create a hazard or cause product damage. Remove string from spool and rewind. Motor runs, but cutting Trimmer damaged. Do not handle plug or tool with wet hands. Reel with automatic line feed with a diameter of 1.65 mm; Battery is not charged. To advance the line when initially installed, you must pull the line while pressing the black line release button on the side of the spool housing (3). Scrupulously comply with local regulations for the disposal of packaging, blades do not move. Make sure lower shaft is fully seated in shaft coupler on upper shaft eyelet in the cutting head. until spool cover clicks into place.
button; their use. Cut tall grass from the top down to prevent wrapping. This trimmer is equipped with a line cut-off blade on the grass deflector. Voltage: 40 volts WARNING Remove the battery pack. Do not discard the packing material until you have carefully inspected RLdgF1hN'@~E'h@_Zj+4$oB{V^+h%c!LVIX. Reinstall the spool cover by depressing tabs into slots and pushing down this product. Press the safety lock out button (2) and squeeze the trigger switch (1) to start. Keep a firm grip with both hands while in operation. 3. 1 5 31105710 0.065 spool assy. grip design with a forearm support. damage, weaken or destroy plastic which may result in serious personal injury. 6. This WARNING
Do not attempt to modify this product or create accessories not recommended This will maintain WARNING Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury. While holding the battery latch place one hand the the trimmer handle Always make sure the string trimmer switch is OFF before inserting or removing the battery pack. If you store your unit for long periods Use only identical manufacturers replacement parts and accessories. of the switch trigger until the line reaches the length of the grass deflector Cutting Path Diameter: 254/305 mm Refer to string replacement earlier LIMITED FOUR-YEAR WARRANTY GREENWORKS hereby warranties this product, to the original purchaser with proof of purchase, for a period of four (4) years against defects in materials, parts or workmanship. button with the positioning hole and slide the two shafts together. SOLUTION To secure the battery pack, make sure the latches on the top of the battery pack snap into place. pack snaps into place. Cutting diameter slide The trimmer is powered by a G-MAX 40V Do not point the string trimmer in the direction of people or pets. (1.65 mm) diameter line. 10. Trimmer smokes during operation. practice will prolong battery pack life. Read, understand, and follow the Battery Charger instructions. operating position before switching on. and a protective guard for the cutting head. The trimmer will cut better when moved from left to right across the area OPERATION CHARGING PROCEDURE (See Figure 10) that maximum run time can be achieved. to the product by the manufacturer and require customer installation. x-mS4MrH{ )dd/D_8&$)fU=B"H$D~w/{pxO/??/xA/?;l\Noy79^~/_|w~~zw/7~Lx]N^>lu~l[{?m[p{9 ry9o\}99Eb/CNt~._/8Lv8cFq:`t^=k`x#t{]M~?n _WrNxqX/pt]n;N _o&@o+#\G'X1x $#OtU^+\q93*saX0@vv F&%;\"Qwf'rXp~?f#~go?#m:!KgCow !|G@noG ?h!:.n@_Uw;Eex0G#xhK4y9?h=>\ AOG})C67dlTZ#$|)SECk=oz9:^382Cdl:"*kex@.gg2|s"U-o\`:jX7'q2a'vE2@EsF/xLBVq^2[N AEz=/5`LlipglXdI+: # $t\\,l-w-lB?h7i`n>+ WARNING Measuered sound power level: LWA.d=96 dB(A) Do not use solvents, water, or place in wet conditions. Failure to avoid contact can result in serious personal injury. With the trimmer running, release the switch trigger. Do not overreach when operating grass trimmer/edger. 1 4 31103723 Lower shaft / motor assy. Try not to cause any disturbance to the surrounding Clean all foreign material from the trimmer. Push down on the spool cover locking it to the spool housing. Loosen the knob on the coupler. KNOW YOUR STRING TRIMMER KNOW YOUR STRING TRIMMER (See Figure 1.) Invert the string trimmer to access the trimmer head. Use original manufacturers replacement cutting line for best performance.
Charge the battery pack according to the instructions included with your model. Any such alteration or modification is misuse Most plastics are susceptible 1. the tool. with each stop and start Replace the spool, and the spool cover. Remove the battery pack. Use For best cutting, advance line until it is trimmed to length by the line Avoid using solvents when cleaning plastic parts. Place the battery pack in the trimmer. 2. 1. Store and charge your batteries in a cool area. Trimmer should be held at a comfortable position with the rear handle parts are replaced. Proper interpretation of these symbols will allow you to operate the product better and safer. Lock-out trigger is angled toward the rear handle that allows for comfortable operation. replaced by the customer. Wind (adsbygoogle = window.adsbygoogle || []).push({}); The battery trimmer Greenworks 40 volt (model G40LT) is an excellent Read all safety rules and instructions carefully before operating this tool. To Turn On/Off: (See Figure 7.) Do not allow foreign material into the recessed cavity or on the contacts. Always make sure the battery pack is removed and the switch turned OFF, before inspecting, adjusting, or maintaining any other part of the hedge trimmer. releases from the slot in the spool. Charger: 29417 / 29447 is lightweight (only 4.2 kg), low noise and vibration levels, and an ergonomic when using the machine, for the benefit of both social coexistence and the
9 Trimmer Tips Before each use Make sure the protective guard is tightly installed. Push in the release button located on the lower shaft. cut-off blade.
WARNING 1 6 3411546A-6 Single line spool cover 1 7 31102723 40V 12 guard assy. head. Weight with battery pack: 4.2 kg 6 0 obj 1. and secure shaft coupler. The battery life will be shortened. use any attachments or accessories not recommended by the manufacturer of Please study them and learn their meaning. TROUBLESHOOTING PROBLEM Motor fails to start when switch trigger is depressed. for use with this product. This lithium-ion battery will not develop a memory and may be charged at any time. penetrating oils, etc., come in contact with plastic parts. to cool and fully charge immediately. << /Length 7 0 R /Filter /FlateDecode >> personal injury. SYMBOLS Some of the following symbols may be used on this product. taken to specified waste disposal centres where the material will be recycled. Its main use is to trim grass in hard-to-reach
The attachment connects to the power head by means of a coupler device. Do not put any object into openings. Use the tip of the cutting line to do the cutting; do not force cutting All batteries gradually lose their charge. the lower shaft until the button locks into the positioning hole. Keep away from corrosive agents such as garden chemicals and de-icing Do not Remove the grass. Battery warranty - 2 years. To stop the string trimmer, release switch trigger to stop. Align the tabs on the spool cover with the slots in the spool housing on the trimmer head. moisture. fits between the slot on the auxiliary handle. Insert the end of line through the opening (4) in the spool housing (3). line to manually advance the cutting line. Align the tongue (3) of the battery pack with the cavity in the blower housing. Comfortable grip with support in the forearm; 4. pack with grooves in the trimmers battery port. Keep the trimmer tilted toward the area being cut; this is the best Avoid contact with
To prevent accidental starting that could cause serious personal injury, 13-Inch 40V Cordless String trimmer, Battery Not Included 21332. The use of attachments or accessories not recommended can Do not use string trimmer. This model is equipped with a fuse against accidental start-up
Description Greenworks 40V Li-Ion charger Q'ty 1 31102998 1 2 31104975 Greenworks 40V 4Ah Li-Ion battery 1 3 31104723 upper shaft / handle assy. Service Centre. Dont expose power tools to rain or wet conditions. Set the unit on a flat, level surface. Make sure the end of the cutting line is extended below normal room temperature will shorten battery pack life. Press and hold the battery latch button on the back of the battery pack. Slide the auxiliary handle over the metal ring and ensure the metal ring Install more string. than normal, or when trimming efficiency diminishes. To avoid serious personal injury, always remove the battery pack from the Fuse and protective cover of the cutting part; Light weight - 4.1 kg; WARNING can easily be damaged by the cutting line. The battery pack may be stored in the charger, however, it is recommended to disconnect the charger from the power source. 3. 1 8 3220905 Guard screws 2 9 1210000101 Guide 1 10 31101723 Auxiliary handle assy. Remove all objects such as rocks, broken glass, nails, wire, or string which can be thrown or become entangled in the machine. Make sure the battery is fully charged and that the charger is disconnected before using or storing the trimmer. result in serious personal injury.
personal injury. Carefully remove the product and any accessories from the box. loose parts such as screws, nuts, bolts, caps, etc. of this trimmer. Always unplug the charger when there is no battery pack in it. Cutting line. Use of any other parts may create a hazard or cause product damage. When servicing, use only identical replacement parts. Manual; C A U T I O N Always allow 5 seconds or more for the cutting line spool to stop rotating after releasing the trigger switch. Use clean cloths to remove dirt, dust, oil, grease, etc. 2. and that battery pack is fully seated and secure in the trimmer before beginning Remove the spool from the cutting head. Inspect the product carefully to make sure no breakage or damage occurred and remove battery pack. and keep hands clear of the lock-out button when carrying or transporting 48 minutes from a 4 A / hour battery) and no need to use gasoline and oil, Once auxiliary handle is in the desired in use position tighten the knob until locked into position. PARTS LIST Parts Num. Stone
ASSEMBLY INSTRUCTION AUXILIARY HANDLE (See Figure 3.) until the button is locked into place. using a philips head screwdriver (not included). Temperatures above or Power tools create sparks which may ignite the dust or fumes. Insert the handle knob through the auxiliary handle. to try to advance the line will damage the trimmer and void the warranty. Minimum time for preparation for work, switching on - by pressing one Do not use this product if any parts on the Packing List are already assembled best performance and keep line long enough to advance properly. Never allow children to operate the equipment. stream Replace the spool (1) with a new pre-wound spool.
Position auxiliary handle onto the upper porti on of the trimmer shaft by sliding over shaft. The battery pack is not charged when it is purchased. motor is protected against overload. the blade. After extending new cutter line, always return the machine to its normal Only the parts shown on the parts list are intended to be repaired or 11. % NOTE: The trimmer is equipped with an auto-feed head. Motor overload protection; example, these are narrow and uneven places, large slopes, etc. GUARD (See Figure 2. MAINTENANCE WA R N I N G before adjusting, inspecting, or cleaning the blower. WARNING .065 in. Keep proper balance at all times for better control of the tool in unexpected situations. Upper shaft Cleaning Remove the battery pack. Advance line whenever you hear the engine running faster Do not use strong solvents or detergents on the plastic housing or plastic components. CAUTION Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury. Store the battery pack where the temperature is below 27C and away from Battery pack: 29717 / 29727 Use of any other parts Use of this product with damaged or missing parts could If grass becomes wrapped around the string head: Remove the battery pack from the trimmer. 2. the shafts are not locked into place. To remove (See Figure 6.) 2. The vibration emission during actual use of the power tool can differ from ENVIRONMENTALLY SAFE BATTERY DISPOSAL The following toxic and corrosive materials are in the batteries used in this hedge trimmer battery pack: Lithium, a toxic material. 5. Switch trigger For complete charging instructions, refer to the Operators Manuals for To install (See Figure 6.) Front handle time and shorten trigger time.
Li-Ion battery (2Ah or 4Ah), which can be used with all other devices in the lines clockwise around the spool simultaneously, as shown by the arrows operation. avoid vibration risk suggestion: Wear glove during operation limit operating String will not advance when using the bump-feed head. ASSEMBLY INSTRUCTION To replace the spool: 1. WARNING 13" 4a electric string trimmer (24 pages), 15" 5.5a electric string trimmer (24 pages), 40v brushless cutter/string trimmer (25 pages), 20v lithium-ion cordless string trimmer (22 pages), 24v lithium-ion cordless string trimmer (23 pages), Top mount curved shaft trimmer (29 pages), 80v battery lawn trimmer and brush cutter 2 in (280 pages), 40v battery lawn trimmer and brush cutter 2 in 1 (179 pages), Manual will be automatically added to "My Manuals", Trimmer GreenWorks 2100000 Owner's Manual, Trimmer GreenWorks 2101000 Owner's Manual, Trimmer GreenWorks 2101202 Owner's Manual, Trimmer GreenWorks 2101602CT Owner's Manual, Page 18: Environmentally Safe Battery Disposal.
Pull the cutting line extending from the cutting head so the cutting line OPERATION CHARGER MAINTENANCE Keep the charger clean and clear of debris. Remove the old spool.
the declared total value depending on the ways in which the tool is used; Do not carry the grass trimmer/edger with your finger on the switch. Wait for battery pack 9. Align raised ribs on battery 3 year warranty. Keep the air vents free of obstructions, sawdust, and wood chips. NOTE: If the button does not release completely in the positioning hole, a careless fraction of a second is sufficient to inflict serious injury. G-MAX 40V G40LT cordless trimmer 30 cm, art. 7. of a product that may have been improperly assembled could result in serious Align the release during shipping.
Tighten until there is no movement in the handle. Brush or blow dust and debris out of the air vents using compressed air or a vacuum. GREENWORKS, at its own discretion will repair or replace any and all parts found to be defective, through normal use, free of charge to the customer. CONTENTS Contents 2 . 2 General safety rules 3-5 Symbols . GENERAL SAFETY RULES WA R N I N G Read and understand all instructions before using this product. NOTE: Remove any old cutting line remaining on the spool. Work from a 40V battery compatible with other devices from the 40V line; NOTE: The line will extend approximately 1/4 in. Parts on this list are not assembled and satisfactorily operated the product. For long-term operation, the GENERAL SAFETY RULES Keep all parts of your body away from any moving parts and all hot surfaces of the unit. Wipe off the housing and the plastic components using a moist, soft cloth. waste must not be disposed of as normal waste, it must be separated and Model Num. WARNING Release the switch trigger and lock-out trigger to stop the trimmer. Failure to do so could result in objects being Shaft coupler Make Store it in a place that is inaccessible to children. Cut tall grass from the top down. after mowing. Align the holes on the auxiliary handle with the holes on metal ring. Contact with the trimmer cutting head while operating can result in serious Grass wraps around shaft housing and string head. Grass deflector Read all safety rules and instructions carefully before operating this tool. salts. replacement for an electric or gasoline trimmer, it is easy to cope with Long autonomous operating time (up to GENERAL SAFETY RULES If the power supply cord is damaged, it must be replaced only by the manufacturer or by an authorized service center to avoid risk. Maintain tool with care. Insert the screws into the trimmer head, fastening the guard in place Align the screw holes on the guard with the screw holes on the trimmer The higher the temperature, Release the trigger switch (1) to stop. to damage from various types of commercial solvents and may be damaged by Pull spool cover up to remove. Avoid trees and shrubs. Do not use with any opening blocked; keep openings free Check the work area before each use. Install the new spool so that the cutting line and slot align with the Refer to string replacement earlier in this manual. the quicker they lose their charge. slot on the new spool. 2 1 3 4 Fig. fasteners and caps and do not operate this product until all missing or Lower shaft To secure the battery pack, make sure the latch on bottom of the battery
Size of the cutting blade 30cm around the shaft housing and string head which may cause damage from overheating. The model about hip height. of time without using it, recharge the batteries every month or two. 5. WARNING laws in force. 3. Refer to spool replacement earlier Do not allow children or untrained individuals to use this unit. Motor fails to start when switch trigger is depressed. 1. 8. Place the guard on to the trimmer head. Wait two seconds, and press the switch trigger. SYMBOLS The following signal words and meanings are intended to explain the levels of risk associated with this product. Tighten securely all The safe use of this product requires an understanding of the information on the product and in this operators manual as well as a knowledge of the project you are attempting.
on the spool. %PDF-1.3 Wire and picket fences cause extra cutting line wear, even breakage. OPERATION WA R N I N G To avoid injury: Do not squeeze the trigger while the grass trimmer/edger is inverted. 2101507, model G40LT; Battery life up to 48 minutes from 4 A / hour battery; your battery pack and charger models. places where a conventional 4-wheel mower simply won't cut the grass. ASSEMBLY INSTRUCTION WA R N I N G Replace the battery pack or charger immediately if the battery case or charger cord is damaged. Thread the cutting line into the eyelet. Never store batteries in a discharged condition. Push in tabs on sides of spool cover. Vibration: 3,5m/s2, K=1,5m/s2. Make sure the latch on the back of the battery pack clicks into place WARNING Environmental protection should be a priority of considerable importance Cut two lines, each being approximately 10 ft. (3 m) long. Charge the battery pack according to the instructions included with
WA R N I N G All toxic materials must be disposed of in a specified manner to prevent contamination of the environment. hand on the front handle. Pull string while pressing line release button. WARNING When not in use, string trimmer should be stored indoors in a dry, locked up placeout of the reach of children. Insert the battery pack (1) into the charger (2). Do not allow familiarity with products to make you careless. Cutting Line Diameter: 1.60 mm ASSEMBLY INSTRUCTION BATTERY IMPORTANT! No load speed: 7,500 (10%) /min 2. area. damaged parts are replaced. 3 1 2 Fig.3 1. If the battery must be stored in a warm place, charge it frequently. Wipe with a dry cloth. This will prevent grass from wrapping Keep fan area clean for best and safest performance. Rear handle TOLL-FREE HELPLINE: 1-888-90WORKS (888.909. A fully discharged battery pack will require approximately 60 minutes (73Wh) / 120 minutes (146Wh) to fully charge from a discharged state. OPERATION Fig. Push the black button located on the cutting head while pulling on cutting WARNING To start the string trimmer, press and hold the lock-out button (1) and to your product when you unpack it. Never use blades, flailing devices, wire, or rope on this product. To install the new spool, make sure the cutting line is captured in the your model. Rotate deteriorated parts or any elements with a strong environmental impact; this cutting area. The advantages of the model: The line cut-off blade on the grass deflector is sharp. in this manual. At the time of decommissioning, do not pollute the environment with the This is a diagnostic charger. in this manual. Ensure a fully charged battery is installed into the string trimmer. 2. trimmer 3. POSSIBLE CAUSE Battery is not secure. WARNING Press the latch button (1) on the battery pack down and hold. Do not store the grass trimmer/edger in sunlight, in an excessively warm place, or near a furnace. tall grass and even small shrubs. Call for technical service. Tree bark, wood moldings, siding, and fence posts Failure to follow all liquids, gases, or dust. 2. trimmer NOTE: may require a strong pull to remove it. NOTE: To avoid serious personal injury, always remove the battery pack Do not spray, wash, or immerse the air vents in water. and could result in a hazardous condition leading to possible serious personal Follow these tips when using the trimmer: Hold the trimmer with your right hand on the rear handle and your left Warranty card. Remember that tool when cleaning or performing any maintenance. Charger Greenworks 40V; thrown into your eyes resulting in possible serious injury. may create a hazard or cause product damage. Remove string from spool and rewind. Motor runs, but cutting Trimmer damaged. Do not handle plug or tool with wet hands. Reel with automatic line feed with a diameter of 1.65 mm; Battery is not charged. To advance the line when initially installed, you must pull the line while pressing the black line release button on the side of the spool housing (3). Scrupulously comply with local regulations for the disposal of packaging, blades do not move. Make sure lower shaft is fully seated in shaft coupler on upper shaft eyelet in the cutting head. until spool cover clicks into place.